LG air conditioner standard "S" consisting of indoor unit and outdoor unit, refrigerant R32 incl. infrared remote control

Features outdoor unit

The housing, made of sturdy sheet steel, is self-supporting and optimally protected against corrosion by the electrostatically applied polyester paint. The direct-drive axial fan is statically and dynamically balanced and thus extremely quiet. The motor is protected against overheating by thermal contacts.
The refrigeration circuit consists of a fully hermetic rolling piston compressor (inverter controlled) mounted on vibration dampers. The suction gas-cooled motor is protected against overheating by a thermal protector. The units have a wide range of sensors used for control and as protection devices, e.g.: Hot gas, condensing, suction line and outdoor air sensors. The condenser is a high performance heat exchanger made of copper tubing with pressed-on aluminum fins and is GOLD-FIN coated for optimum corrosion protection. The refrigeration circuit is dried, evacuated and filled with R32. The refrigerant connections are located on the side of the unit for easy installation. The electrical supply is made via the outdoor unit. All connections are protected against sabotage and external influences by a plastic cover.

Features indoor unit

The design air conditioner in a flat design in the color "white" is intended for mounting on the wall (ceiling area). The device is equipped with a "Dual Protection" filter, which filters out dust from a size of 10 µm from the air. The filter can be quickly disassembled, is regenerable and easy to clean. The housing is made of plastic.
On the bottom of the device is a removable panel under which all necessary connections are located. A disassembly of the complete casing is not necessary. In addition, a mounting clip provides on the one hand for the sufficient distance between the wall and the device on the other hand to fix the piping, which facilitates the installation. A Wi-Fi control module is only optionally retrofittable with the standard model.

The fan (BLDC motor) is direct-driven and vibration-damped bearing. The extremely quiet running radial fan is dynamically balanced and 4-stage switchable. Skew Fan: By minimizing the surface pressure of the fan blade when it comes into contact with air, the noise peak is minimized to be among the quietest in the world.

The direction of the vertical blades can only be adjusted manually on the standard model.
With the Jet Cool function, the air is evenly distributed at maximum speed, guaranteeing optimal and rapid cooling.
The condensate tray is made of plastic and is insulated against condensation. It is equipped with a drain socket on both sides. While there is a drain plug on one side, a flexible condensate hose is integrated on the other side. This unit does not include a condensate pump as standard.
The unit comes with an infrared remote control as standard.

Advantages

• Monitoring of the set target temperature
• pleasantly dry room air
• "Fuzzy Logic" control for a comfortable room temperature control
• automatic fan control (depending on the. Room temperature)
• Automatic restart after power failure
• 24 hour timer
• Fault diagnosis system
• Monitoring evaporator surface temperature (frost protection and defrost)
• Self-cleaning function of the indoor unit
• Antibacterial filter
• Automatic mode change, cooling / heating (Only possible with single split)